Advantech SG-1103 Manuale Utente Scaricare il pdf (Pagina 41)

33 ROM-5420 User Manual

Chapter 3 Software Functionality

3.8.3 GPIO Setting

Please see GPIO initial code listed below. Below code is to assign the starting value

to GPIO variable.

/* Enable GPIO */

gpio_request(SABRESD_GPIO0, "gpio-0");

gpio_request(SABRESD_GPIO1, "gpio-1");

gpio_request(SABRESD_GPIO2, "gpio-2");

gpio_request(SABRESD_GPIO3, "gpio-3");

gpio_request(SABRESD_GPIO4, "gpio-4");

gpio_request(SABRESD_GPIO5, "gpio-5");

gpio_request(SABRESD_GPIO6, "gpio-6");

gpio_request(SABRESD_GPIO7, "gpio-7");

gpio_request(SABRESD_GPIO8, "gpio-8");

gpio_request(SABRESD_GPIO9, "gpio-9");

gpio_request(SABRESD_GPIO10, "gpio-10");

gpio_request(SABRESD_GPIO11, "gpio-11");

3.8.4 RS232 Initial Code

The RS232 initial code as below. It shows you how to initial COM2 ports.

int open_port(void)

{

int fd;

fd=open("/dev/ttymxc1",O_RDWR|O_NOCTTY|O_NDELAY);

if(fd == -1){

perror("open error");

}

return(fd);

}

3.8.5 Display Output Setting

3.8.5.1 LVDS Settings

Please set environment in u-boot as below:

setenv bootargs_mmc 'setenv bootargs ${bootargs} root=/dev/

mmcblk1p1 rootwait rw video=mxcfb0:dev=ldb,LDB-XGA,if=RGB24'

LDB-XGA is an example for the resolution of your LVDS panel. You can input the

actual resolution of your LVDS panel here, such as 800x480, 1024x768, etc. The sys-

tem will accomplish the corresponding parameters automatically.

If the panel has problem to be activated, you may need to check the panel datasheet

to configure the panel related parameters. The LVDS video mode database is stored

in linux-3.0.35/drivers/video/mxc/ldb.c. You can add a new one for your LVDS panel.

static struct fb_videomode ldb_modedb[] = {

{

"LDB-XGA", 60, 1024, 768, 15385,

1 2 ... 36 37 38 39 40 41 42 43 44 45 46 ... 53 54

Commenti su questo manuale

Nessun commento

Advantech SG-1103 Manuale Utente Pagina 41

Commenti su questo manuale

Prodotti e manuali riguardandi Gateway/Controller Advantech SG-1103