Advantech PCM-3350 Specifiche Scaricare il pdf (Pagina 6)

Step 2.3 Enabling secondary IDE

Go to xPC Explorer, under TargetPC1> Configuration> Settings and enable “Enable Secondary IDE” (see

figure above). This will allow you to store data on the CF card. This data can be anything starting from

error messages, A/D readings, serial port inputs etc.

Step 3 Model file Configuration

This needs to be done for every real time model you build. However unlike the setup processes in step 1

and step 2, these configurations are local to individual files. Since, the model files will be saved (not on

the lab computers); these configurations will not require redoing every time unless you specifically want

to change them.

Go to MATLAB main window, then click on File> New> Model

A new Simulink model file will appear. Then go to Simulink> Configuration Parameters as shown above.

In the window that appears set “Fixed step size” based on the lowest sample time you want to use on your

model (see figure below).

1 2 3 4 5 6 7 8 9 10 11 ... 18 19

Nessun commento

Advantech PCM-3350 Specifiche Pagina 6